List Name
There are many variations of passages of Lorem
Ipsum available, but the majority have suffered alteration in some form
Acrel ADW300 Three-Phase DIN Rail Energy Meter with RS485/4G/WIFI/LoraWAN
Measurement: 3-phase Active Power, Reactive Power, Current, Voltage, Harmonic and etc.Rated Current: 3x5A ACRated Voltage: 380V/220V ACCommunication: RS485,4G,WIFI,LoraWANHMI Programming: Setting of CT/PT Ratio, Phase Wiring, Communication and etcApplication Scenario: Building, Factory, Commercial buildings, DB Room and etcStandard&Certificate: CE; IEC; LVD
Acrel APD100 Series UHF Partial Discharge Detector
·Application scenario: Suitable for integrated installation of medium voltage switchgear (61 cabinets, 28 cabinets, ring main unit) before leaving the factory or for power-off installation of high-voltage switchgear that has already been put into use.
·Product features: The system has strong anti-interference ability and high reliability.
·Monitoring content: discharge frequency, discharge capacity, PRPD/PRPS map, etc.
Acrel ATE400 Strap-type wireless temperature sensor
Range of Measurement: -50℃~+125℃Communication: GFSK Wireless CommunicationApplication: Switch-gear, Bus-bar, Bus duct, Electric contact, Cable joint, Rain main unit and etcInstallation: Alloy Sheet FixedProtection Level: IP68 (Optional)Power Supply: CT Sensing PowerStandard&Certificate: CE
Acrel APD100 Series UHF Partial Discharge Detector
·Application scenario: Suitable for integrated installation of medium voltage switchgear (61 cabinets, 28 cabinets, ring main unit) before leaving the factory or for power-off installation of high-voltage switchgear that has already been put into use.
·Product features: The system has strong anti-interference ability and high reliability.
·Monitoring content: discharge frequency, discharge capacity, PRPD/PRPS map, etc.
Acrel AMB Series intelligent bus monitoring device
· Direct-current Bus Bar Monitor
· Support online alarm function
· Support Bus interface temperature monitoring
· Max.64 device data collection,support MODBUS-RTU or MODBUS-TCP device
· Supports RS485 wired and Lora wireless solutions
· Support full electrical parameter measurement
· Multiple funtions setting for each device
Acrel ADL200N-CT/DXX Single Phase Solar/PV Bidirectional Energy Meter
Rated voltage:AC230V
Input current:80A, 120A, 200A, 300A
Frequency:45~65Hz
Measurement: 1 phase AC kWh, kVarh, U, I, P, Q, S, PF, F and etc
Communication: RS485(Modbus-RTU)
Communication address range:Modbus RTU:1~ 247
Certificate:CE
Acrel AIM-D100-T DC100-1000V din rail LCD indication insulation monitor
Auxiliary power supply: DC9~36V
Voltage monitoring range:DC100~1000V
Insulation resistance monitoring range:1kΩ~10MΩ
Insulation alarming range:10kΩ~10MΩ
Insulation monitoring mode:Real-time monitoring
Accuracy: Class 0.5
Communication: RS485(Modbus-RTU)
Installation: DIN-rail
Protection level:IP30
Certificate&Standard:CE
Acrel AIM-D100-CA DC0-1000V din rail LED indication insulation monitor
Auxiliary power supply: DC9~36V
Voltage monitoring range: DC0~1000V
Insulation resistance monitoring range:1kΩ~10MΩ
Insulation alarming range:10kΩ~10MΩ
Insulation monitoring mode:Triggered by RS485 Comms
Accuracy: Class 0.5
Communication: RS485(Modbus-RTU)
Installation: Wall-mounted or din rail
Extra current monitoring:1-channel DC current metering via shunt; 5% accuracy